Print

Cone 10 Transparent Glaze

Description

A long-time base transparent glaze recipe used in the Plainsman Clays studio, our lab number G1947U. It works on all Plainsman high temperature reduction bodies (also oxidation). The recipe employs New Zealand Kaolin for the cleanest possible fired appearance.

This recipe is better than most others used for a number of reasons.

  • It has a low thermal expansion because it is not saturated with feldspar.
  • It is not short of SiO2 so a hard durable glass is produced.
  • It sources CaO from Wollastonite instead of calcium carbonate, this keeps LOI low (and therefore entrained micro-bubbles.
  • It has sufficient kaolin to produce a slurry with good application properties.
  • It contains a little zinc to jump start melting earlier.

Recipe

As of June 2017 it is not yet available as a premixed product. However you can make it yourself, the recipe is here.

A wide range of glazes can be made from this base. For example:

  • Add 2-5% iron oxide for a celadon.
  • Add 6-8% for brown crystalline.
  • Add 10-12% for a tenmoku.
  • Add 12%+ iron oxide for purple crystalline mesh.
  • Add 10% zircon for white.

Gallery

P700 cone 10R Mug by Tony Hansen. Alberta Slip (pure) outside, G1947U transparent inside.

P580 mugs fired at cone 10R. Pure Alberta Slip as a glaze outside. G1947U clear glaze inside. Glaze employs Grolleg Kaolin (left two mugs) and EPK (right mug). By Tony Hansen.

Safety Data Sheet

Click here for web view.

Logo Plainsman Clays Ltd.
702 Wood Street, Medicine Hat, Alberta T1A 1E9
Phone: 403-527-8535 FAX:403-527-7508
Email: plainsman@telus.net